HEC Group USA

Windmill Pro 385

Typical overall output efficiency is 72% by measuring with the maximum loads on all outputs at normal AC input voltage and efficiency
Ultra quiet technology
Intel ATX 12V Version 2.2 Compliance
Auto adjusting 12 cm fans speed bases on temperature detected inside power supply
1x 12 cm big fans for enhanced dependability and durability
Multiple protection mechanisms to ensure maximum stability under the most severe operating conditions
No damage or hazardous conditions should occur after all DC output connections have been disconnected from the load. The power supply may transfer itself into a shut down state disconnection
20+4 pin Main Power Connector
1x 4 pin for ATX12V
6x Molex Connector
2x Floppy Drive Connector
2x SATA Connector
1x PCI-E Connector
MTBF 100,000 hours

Dimension : 150 (W) x 165 (L) x 86 (H)mm

Warranty: One Year

^{Model Name}	^{WINDMILL PRO 385}
^{Temperature Range}	^{Operating Ambient: 0°C ~ 50°C, non-operating -40°C ~ 70°C}
^{Hold-up Time}	^{16.6 ms minimum at full load & normal input voltage}
^Humidity	^{5~95% RH}
^{Power Good Signal}	^{On Delay 100~500 ms, Off Delay 1 ms}
^{Overload Protection}	^{110% ~ 150% load}
^{Over Voltage Protection}	^{+5V MAX 6.3V,+12V MAX 15.6V,+3.3V MAX 4.5V}
^{In Rush Current}	^{45A MAX for 115V or 5.0A MAX for 230V}
^{Remote Sensing}	^N/A
^{Cooling Fans}	^{12 cm Fan}